PROTECTED WARDROBE RULE — HIGHEST PRIORITY: Treat each garment description below as its immutable final product identity. Preserve construction, parts, hardware, material, pattern, and every registered graphic or marking—its surface, side, orientation, scale, colors, content, spelling, and count. FINAL WORN STATE overrides only the scoped item's use, position, side, orientation, fastening, layering, folds, tucks, knots, and drape. A SOURCE GARMENT label describes the unstyled item, never the completed silhouette. Do not redesign, add, remove, mirror, duplicate, relocate, or redraw protected details.
Wardrobe:
Top: One pale butter-yellow long-sleeve babydoll tunic top made from lightweight smooth stretch jersey with a soft satin sheen and narrow ivory scalloped floral lace. It has a lightly fitted upper bodice and a full lower section flaring to a gently curved upper-hip hem from a high empire line. A shallow wide scoop neckline contains one centered oval keyhole. The smooth upper front joins the gathered lower front along a horizontal empire seam; plain shoulder and side seams connect the front and rear panels, and two extra-long set-in sleeves widen gradually toward loose open ends. Narrow turned hems finish both sleeve ends and the lower edge. A narrow lace band crosses the front empire seam between the side seams, with fine floral motifs and a shallow scalloped lower edge. Two narrow self-fabric cords fixed at the upper keyhole tie into a compact bow with two rounded loops and two long tapered tails extending below the empire line, securing the keyhole. The rear completes as a plain upper panel above a matching gathered and flared lower panel, with the empire seam continuing at a level height and no additional opening. Keep the jersey fluid and evenly lustrous, the gathers dense and regular, the lace crisp, and every hem light and flexible.
Bottom:
One warm taupe-grey low-rise pleated micro miniskirt made from compact matte suiting twill with a fine woven surface, crisp fold retention, medium-light fabric mass, and clean narrow hem bulk. A deep contoured waistband forms a smooth upper yoke before the skirt opens into evenly distributed deep knife pleats with broad flat outer faces, narrow shadowed underfolds, and a short controlled A-line flare ending at the upper thigh. The front waistband closes at the wearer's right with one round self-covered button on a short overlapping end. Embroider the clearly legible wording "Mona Girl" in small cream flowing cursive along the wearer's left front waistband, confined above the pleat seam. Continue the pleat system across both side surfaces and the rear surface with consistent fold depth, straight vertical crease paths, individually turned lower edges, and a level continuous hem.
Final worn state:
- Waist position: Position the entire waistband level above both hip bones, with its top edge near the navel and natural waist. Keep the front, sides, and back at one continuous height. Do not lower it onto the hips, tilt one side, or fold the waistband outward.
Legwear:
One matching pair of lemon yellow over-the-knee stockings made from plain semi-sheer stretch knit and tonal floral lace. Each member has a close tubular shaft with a gently tapered lower extent. A broad stretch-lace upper opening has shallow scalloped edges along both boundaries. The lace band joins the plain fine-knit shaft through a narrow flexible seam. Dense horizontal rows of curved floral sprays, fan-shaped scallops, elongated oval medallions, and small eyelet openings fill the entire lace band. Each stretch-lace upper band provides a pull-on closure without hardware. Both members repeat identical band width and motif scale, and each continues through a fitted lower shaft into a simple closed foot with a flat toe seam. Keep the knit evenly translucent and the lace matte, sharply resolved, evenly tensioned.
Final worn state:
- Legwear position: Pull the selected legwear on both legs straight to the same lower-thigh height immediately above the complete kneecaps. Keep both top bands level, smooth, and unrolled with no twisting or bunching; preserve the design assigned to each leg.
Footwear: One matching pair of anatomical mirror-counterpart solid-cognac chunky platform horsebit loafers made from smooth glossy leather-like sheet material over matte molded cognac rubber soles, with localized silver metal hardware. Each shoe has a low-cut compact profile, a broad rounded-square closed toe, and a thick raised base whose forepart and rear remain in the same thick-base depth class, with only a low rear increase. A shallow U-shaped loafer opening curves around the rear and joins a broad closed vamp. The upper combines a broad smooth vamp with low rear quarters. The platform consists of a slim glossy welt band above a deep smooth sidewall and a thick lugged outsole with a low integrated block heel. A raised apron seam follows the forepart perimeter, fine tonal topstitching follows the apron and collar edges, and a silver horsebit assembly spans the vamp with one rounded end ring on each side joined by a short linked connector. The uninterrupted collar and vamp form a clean slip-on construction. Make both shoes identical in upper construction, opening shape, toe profile, bit geometry, platform depth, heel profile, hardware, color, and finish except for anatomical mirroring. Keep the glossy surfaces smooth, the platform edges crisp, the lug depth consistent, and the sole bonding clean.
Necklace: One medium-length warm gold-tone beaded necklace with a single flexible strand and a centered floral pendant. It forms a compact symmetrical oval circuit with a gentle graduated emphasis toward the pendant. A continuous beaded opening is built on fine gold-tone links. Small polished gold spacers alternate with irregular cream pearl-like beads and sparse translucent pale-aqua and blush beads, with slightly larger beads clustered near the center. A short connector suspends a compact radial flower assembled from five rounded pale-aqua and milky-white beads encircling a tiny gold-tone core, followed by one small ivory pearl-like drop. A discreet matching spring-ring clasp and plain terminal jump ring secure the rear circuit. The hidden rear segment continues the same small spacer rhythm without an additional focal element. Keep the bead surfaces softly lustrous, the pastel translucency clear, and the pendant geometry balanced and sharply separated.
Bracelet:
One flexible silver-tone floral cluster bracelet formed as a continuous articulated circuit. Alternate compact five-stone flower rosettes with paired marquise-shaped leaf links, connecting every unit through small concealed silver hinges so the outer perimeter remains softly scalloped. Set transparent colorless faceted stones into polished silver-tone prong settings, allowing restrained cool pale-blue reflections across the repeated flower and leaf units. Keep the rosette diameter, leaf length, setting height, link spacing, and stone orientation consistent through the full sequence. Integrate one compact tongue-and-box clasp beneath a flower cluster so the visible motif rhythm continues across the closure. Use rigid polished silver-tone metal for the settings and links, with crisp prongs, smoothly eased reverse surfaces, precise articulation, and bright controlled highlights. Use clear stones with sharp planar facets, high transparency, and evenly matched scale.
Final worn state:
- Bracelet placement: Render one complete instance of the registered bracelet from the item description immediately above around only the wearer-left wrist. Keep the wearer-right wrist free of this bracelet; do not mirror or duplicate it. Preserve the registered design and count. Keep other separately selected wrist items unchanged.
- Wrist accessory layering: Fasten the bracelet around the wrist over the fitted sleeve of the selected Top item, keeping the sleeve smooth beneath it. Change only layer order, contact, and occlusion. Keep each item's front, rear, side, edges, openings, and connections distinct. Visibility follows only existing apertures or optical transmission through existing material; every source edge and panel connection retains its geometry. Contact response stays shallow and fades within connected panels.
